Heavy Duty Plus Q4 2019

OTC-5190A OTC-6980 TGR-10102 TGR-10803 LNG-833 CAL-199 OTC-6979 AST-78830 CAL-201 CAL-907 $319. 99 $161. 99 $279. 99 $579. 99 $125. 99 $165. 99 $324. 99 $145. 99 $265. 69 $137. 99 PULLERS 200 Heavy Duty U-Joint Puller Fits all Class 7 and 8 trucks, including: • Spicer 1610, 1710, 1760, 1810, 1880 • Spicer SPL 140, 170, 250 “Life Series” • Meritor 16N, 17N, 18N, 1710, RPL 20 and 25 “Permalube Series” UNIVERSAL JOINT AND YOKE PULLERS BRAKE SERVICE PULLERS 7 Ton Capacity Brake Drum and Rotor Puller • Handles large components such as brake drums, rotors, drive wheels, gears, flywheels, and pulleys • Spread to 12-3/4" and 5" of reach • Can be used with air tools Heavy Duty U-Joint Puller • For disassembling even the most seized U-joints in minutes on virtually all Class 7 and 8 trucks and machinery Application: • U-Joints with bearing cups 1.5" to 2.2" O.D. • Spicer 1610, 1710, 1760, 1810, 1880 Series • Spicer SPL 140, 170, & 250 Life Series • Meritor (Rockwell) 16N, 17N, 18N, 1710 Series • Meritor RPL 20, 25 Permalube Series Heavy Duty Yoke Puller • Removes heavy duty yokes on drive shafts, transmissions and rear-end differentials without damage to yokes or other components • Generates over 25,000 lbs of pulling power Application: • Yokes with a bearing diameter between 1-7/8" and 2-3/16" • Spicer and Meritor 1610, 1710, 1760, 1810 Series • Spicer SPL 140, 170, 250 Series • Meritor (Rockwell) RPL 20 and 25 Series Brake Drum and Rotor Puller • Saves time and reduces damage to the wheel bearing • Eliminates the need to repeatedly strike or heat the brake drum to free it from the hub • Adjustable with a 17" spread and 6" reach to accommodate the most common drum sizes U-Joint Puller • Remove even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks • Engineered for use with up to a 1” impact tool. • Eliminates dangerous vice and socket, or hammering removal methods. • Does not damage the driveshaft, yokes, joints or bearing cups. Heavy Duty Brake Drum and Rotor Puller • Designed for medium and heavy duty brake applications • Two 3/4" x 14 UNF Forcing Screws (6.2" and 13.3" threaded length) with 1" diameter hex and striking cap • One 1/2" x 2-1/4” x 19-3/4" Cross Bar - tapped 3/4 x 14 UNF • Two 2" x 15-3/4" puller legs with gripping radius • One 8-foot ratcheting safety strap Heavy Duty Hub Drum and Rotor Puller Kit • Use with impact wrench to remove hubs, drums and brake rotors • Durable forged, design, made from the same alloy as Astro's famous ball joint press • Use with 1-1/4" socket and 1-1/4" or 32mm wrench C-Frame Socket Press Set • Designed for the removal and installation of driveline and non-driveline components. • Set includes a rigid C-frame with 2-1/2 Ton capacity and eight impact rated adapters for a wide range of removal and installation applications. • For use on cars, light-duty trucks, ATV, UTV, equipment, and farm machinery. • Includes a heavy-duty blow molded storage case. Intermediate U-Joint Puller • Disassemble even the most seized U-joints on intermediate, buses, farm and light industrial vehicles. • Eliminates dangerous vice-and-socket or hammering methods. • Reduces risk of damage to the driveshaft, yokes, joints or bearing cups • U-joints with bearing cups 1.25” to 1.7” OD. October 1 to December 31, 2019 Due to tariff increases, pricing subject to change. Please call your local supplier for most current pricing.

RkJQdWJsaXNoZXIy NTU2MTA=